|
Monday, June 5, 2023
| Time | Event | (+) |
| 11:00 - 12:00 | Arrival - Arrival and welcoming of participants | |
| 12:00 - 13:20 | Lunch (provided on site) | |
| 13:20 - 13:30 | Introduction - T. Divoux / S. Deville | |
| 13:30 - 14:30 | From Soft Matter to hard materials: Applications and Stakes of this transformation for Aeronautical Materials - Sophie Senani (SAFRAN) | |
| 14:30 - 14:55 | Setting of mineral foams: reaction kinetics vs arrest of foam structure aging - Marie Le Merrer | |
| 14:55 - 15:20 | 3D microfabrication of silicon-based nanostructures using dual one and two-photon hybrid photoresist for high resolution and grayscale 3D microprinting - Akos Banyasz | |
| 15:20 - 15:45 | PDLLA design and synthesis: a tool for the improvement of freeze-cast scaffolds properties for biomedical application - Prescillia Lagarrigue | |
| 15:45 - 16:10 | On the Spreadability of Stereolithography Pastes for the Design of strong Ceramic Parts - Sylvain Fournier | |
| 16:10 - 16:30 | Coffee break (on site) | |
| 16:30 - 17:30 | Sol-gel synthesis of vitrimers with high glass transition temperatures - Damien Montarnal (CP2M) | |
| 17:30 - 17:55 | Mesure d'effets mémoires par spectroscopie diélectrique sur des polymères vitreux sous traction - Caroline Crauste-Thibierge | |
| 17:55 - 18:20 | Phase separation during geopolymerization - Jean-Baptiste d'Espinose de Lacaillerie | |
| 18:20 - 18:45 | Role of the precursors and molecular interactions on the self-assembly of organosilanes during the sol-gel elaboration of hybrid mesoporous films - Jakub Kusz | |
| 19:00 - 20:30 | Cocktail (on site) |
Tuesday, June 6, 2023
| Time | Event | (+) |
| 09:00 - 09:20 | Breakfast (on site) | |
| 09:20 - 10:20 | Design of organic-inorganic networks from nano building units: the hybrid effect on dynamic properties of polymers - Laurence Rozes (LCMCP) | |
| 10:20 - 10:45 | Intracellular biodegradation and recrystallization of gold nanostructures - Florent Carn | |
| 10:45 - 11:05 | Coffee break (on site) | |
| 11:05 - 11:30 | Synthesis of anisotropic zirconia needles and its alignment using ice-templating technique - Swapneel Thakkar | |
| 11:30 - 11:55 | A Pickering emulsion template for 3D printing of porous ceramics based on natural clay - Anne Aimable | |
| 11:55 - 13:30 | Lunch and poster session (on site) | |
| 13:30 - 14:30 | Fluidification de suspensions non-browniennes: rôle de la formulation et rôle des ultrasons - Annie Colin (ESPCI) | |
| 14:30 - 14:55 | Spherical balls settling through a quiescent cement paste - Agathe Robisson | |
| 14:55 - 15:20 | Very early-stage flocculation dynamics of a mineral paste - Pascal Hebraud | |
| 15:20 - 15:45 | Heterogenous flows in sheared cement suspensions - Subhransu Dhar | |
| 15:45 - 16:05 | Coffee break | |
| 16:05 - 16:30 | Mechanical and structural properties of colloid gels obtained through flow cessations - Thomas Gibaud | |
| 16:30 - 16:55 | Hydrogel Membranes for Selective Filtration - Sixtine De Chateauneuf | |
| 16:55 - 17:20 | Typical three-layer orthotropic organization of articular cartilage achieved through the combined action of frontal ultrafiltration and ultrasound on cellulose nanocrystal suspensions, revealed by in situ SAXS - Frédéric Pignon | |
| 17:20 - 17:45 | Cellulose-MOF suspensions: towards self-supported polyfunctional materials designed from ultrafiltration - Lorenzo Metilli | |
| 19:30 - 22:00 | Dinner at La Commune, near ENS https://lacommune.co/ |
Wednesday, June 7, 2023
| Time | Event | (+) |
| 08:50 - 09:10 | Breakfast (on site) | |
| 09:10 - 10:10 | Control of the hierarchical organization processes between complementary building blocks by irreversible self-assembly: a few examples of local and macroscopic rules - Frank Artzner (IPR) | |
| 10:10 - 10:35 | Fast Microfluidic Osmotic Compression with In Operando Meso-structure Characterization by SAXS - Yannick Halez | |
| 10:35 - 10:55 | Coffee break (on site) | |
| 10:55 - 11:20 | Polymer-functionalized mesoporous materials: from the design of building blocks to the control of internal pore structure, external particle surface, and hybrid solid morphology - Corine Gerardin | |
| 11:20 - 11:45 | Fabrication of porous scaffolds for bone substitution: coupling particle design and freeze-casting process - Jérémy Soulié | |
| 11:45 - 12:10 | Designing tough and self-healing composite hydrogels for biomedical applications - Alice Gibiino | |
| 12:10 - 12:25 | Concluding remarks & perspectives |
|
|